TM 9-2320-211-20
MATERIEL USED IN CONJUNCTION
WITH MAJOR ITEM
Section I. HOT WATER PERSONNEL HEATER KIT
the heater outlet, adapter elbow, and heat diverter
assembly.
The personnel heater, which is bolted to the top of
the left fender splash shield in the engine com-
partment, distributes heated air to the cab and / or
a. Removal.
windshield defroster through a blower and heat
(1) Disconnect the cable (A, fig. 3-1) from the
diverter. The heat flow is controlled by AIR and
socket on the heater unit.
D E F R O S T E R knobs on the instrument panel.
These knobs operate butterfly or damper valves in
(2) Disconnect the cables (B and C, fig. 3-1)
securing the adapter to the rear of the heater unit
from the double connector.
( 3 ) Loosen the two clamps (one clamp at
either end of the heater unit). Disconnect both the
outlet and inlet ducts from the heater unit (fig. 3-1).
Disconnect the two hoses.