TM 9-2320-272-24-3
4-119. STEERING GEAR (ROSS) REPAIR (Contd)
Apply a generous amount of GAA grease to bearing race inside of cover (15) and install forty-four
26.
bearing rollers (14) in side cover (15).
Install steel backup washer (13), new retaining ring (12), and new two-piece seal (11) in steering
27.
gear side cover (15) with seal retainer (16).
Apply clean GAA grease to short bearing end of sector shaft (17) and place in side cover (15).
28.
NOTE
Adjusting screw has left-hand threads.
Install sector shaft adjusting screw (18) counterclockwise through side cover (15) and into sector
29.
shaft (17).
Loosen adjusting screw (18) one turn clockwise to permit sector shaft (17) to turn freely in side
30.
cover (15).
Thread jamnut (19) a few turns onto adjusting screw (18).
31.
4-635