TM 9-2320-392-10-1
30K WINCH OPERATION - Continued
0035 00
30K WINCH OPERATION WITHOUT LOAD - Continued
18. Position MAIN WINCH RH switch (9) to OUT and pay out cable (10) its entire length.
19. Position MAIN WINCH RH switch (9) to IN.
CAUTION
Ensure there are no gaps between layers of cable. Gaps between cable
layers indicate loose winding. Failure to comply may result in damage to
equipment.
Ensure MAIN WINCH RH SPEED is in the LOW position when not in use.
Failure to comply will result in draining of batteries.
20. Position MAIN WINCH RH SPEED switch (8) to LOW.
21. Reel in cable (10) until cable is fully recovered.
0035 00-21
