TM 9-2320-392-10-1
30K WINCH OPERATION - Continued
0035 00
30K WINCH OPERATION WITHOUT LOAD - Continued
CAUTION
Ensure cable is clear of crossbar and sandshoe when reeling in cable. The
cable socket may catch on crossbar or sandshoe. Failure to comply may
result in damage to equipment.
15. Position MAIN WINCH RH switch (9) to IN and reel in cable (10) until approximately
12 inches (61 cm) of cable is hanging from the power fairlead (12).
16. Repeat steps 11 and 12.
NOTE
After the first five wraps of cable have been payed out, positioning MAIN
WINCH RH SPEED switch to HI is allowed.
17. Position MAIN WINCH RH SPEED switch (8) to HI (high).
0035 00-20
