TM 9-2320-392-10-1
M1084A1/M1086A1 MATERIAL HANDLING CRANE
0030 00
(MHC) OPERATION - Continued
STOW MHC
NOTE
HOIST lever and TELESCOPE lever are operated at the same time.
1.
Position HOIST lever (22) to UP to reel in cable (23) until approximately 2.0 ft (0.6
m) of cable hangs from boom (44).
2.
Position TELESCOPE lever (36) to IN to retract boom (44) so that cable (23) and hook
assembly (5) are on Operator's side of vehicle.
3.
Operate SWING lever (43) to align lock pin holes (46) in turntable bearing (33).
4.
Install pin (32) in turntable bearing (33).
5.
Operate BOOM lever (28) so that boom angle is approximately 45 degrees.
6.
Position TELESCOPE lever (36) to IN to retract boom (44) completely.
0030 00-20
