TM 9-2320-366-20-5
This task covers:
a. Installation
c. Follow-On Maintenance
b. Removal
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Wrench, Torque 0-600 lb-ft (Item 60, Appendix C)
Cargo bed side panels and stakes removed (TM
Wrench Set, Socket (Item 47, Appendix C)
9-2320-366-10-1).
Materials/Parts
Pin, Cotter (20) (Item 277, Appendix G)
Tools and Special Tools
Sling, Cargo (Item 31, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
(2)
WARNING
Ensure vehicle is on level ground prior to
installation of collapsible drums. Failure
to comply may result in serious injury or
death to personnel or damage to
equipment.
a. Installation.
NOTE
Front and rear chains are assembled the
same way. One front chain shown.
(1) Position clamp half (1) in hook (2).
(2) Install clamp half (3) on clamp half (1) with spring collar
(4) and pin (5).
