TM 9-2320-366-20-5
b. Installation.
(1) Position bracket (1) in vise.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(2) Apply sealing compound to threads of four screws (2).
(3) Install connector J921 (3) on bracket (1) with four screws
(2) and self-locking nuts (4).
(4) Install switch (5) on bracket (1) with locking ring (6),
switch cover (7), lockwasher (8) and nut (9).
(5) Close switch cover (7) on switch (5).
(6) Install terminal lugs TL164 (10) and TL165 (11) on
switch (5) with two lockwashers (12) and screws (13).
(7) Apply adhesive to two screws (13), lockwashers (12),
and terminal lugs TL164 (10) and TL165 (11).
20-385
