TM 9-2320-366-20-5
REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Adhesive (Item 8, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Sealing Compound (Item 59, Appendix D)
Vise, Machinist (Item 48, Appendix C)
Nut, Self-Locking (4) (Item 130, Appendix G)
a. Removal.
(1) Disconnect connector P921 (1) from connector J921 (2).
(2) Loosen two knobs (3) on bracket (4).
(3) Remove bracket (4) from cargo bed (5).
(4) Position bracket (4) in vise.
(5) Remove two mounts (6) from knobs (3).
(6) Remove two knobs (3) from bracket (4).
