TM 9-2320-366-20-5
20-68. LIGHT MATERIAL HANDLING CRANE (LMHC) MAST AND SWING ASSEMBLY
REPAIR (CONT)
(5) Install two bearings (11) in housing (7).
(6) Install woodruff key (12) on shaft (13).
(7) Install worm gear (14), two washers (15), washer (16),
and shaft (13) in housing (7).
WARNING
Retaining rings are under tension and can act
as projectiles when released causing severe
eye injury. Use care when installing retaining
rings. Failure to comply may result in injury to
personnel.
(8) Install two washers (17), washers (18), and retaining
rings (19) on shaft (13).
(9) Install handle (20) on shaft (13) with retaining ring (21).
20-378
