TM 9-2320-366-20-5
20-54. 200 AMP TERMINAL BLOCK TO POWER DISTRIBUTION PANEL (PDP) 12 VDC
CABLE REPLACEMENT (CONT)
(17) Remove screw (27) from PDP (28).
(18) Position four terminal lugs (29) and terminal lug TL41
(30) on PDP (28) with lockwasher (31) and screw (27).
(19) Tighten screw (27) to 35-45 lb-in. (4-5 Nm).
(20) Install PDP (28) on dashboard (32) with three screws
(33).
(21) Install three washers (34) and screws (35) in PDP (28).
c. Follow-On Maintenance.
(1) Install PDP cover (para 16-2).
(2) Install lower radiator fan shroud (para 6-4).
(3) Connect batteries (para 7-57).
(4) Raise spare tire (TM 9-2320-366-10-2).
(5) Start engine (TM 9-2320-366-10-1).
(6) Check VOLTS gage for charge indication (TM 9-2320-
366-10-1).
(7) Shut down engine (TM 9-2320-366-10-1).
End of Task.
20-304
