TM 9-2320-366-20-5
(14) Loosen two screws (24) in heat shield assembly (25).
(15) Remove 200 amp terminal block to PDP 12 vdc cable
(20) from heat shield assembly (25).
(16) Remove self-locking nut (26), screw (27), clamp (28),
and 200 amp terminal block to PDP 12 vdc cable (20)
from frame rail (29). Discard self-locking nut.
(17) Remove 200 amp terminal block to PDP 12 vdc cable
(20) from clamp (28).
(18) Remove self-locking nut (30) and screw (31) from
clamps (32 and 33). Discard self-locking nut.
(19) Remove 200 amp terminal block to PDP 12 vdc cable
(20) from clamp (32).
(20) Remove 200 amp terminal block to PDP 12 vdc cable
(20) from cab (34).
20-301