TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Dump body raised to maintenance position (TM 9-
Screwdriver Attachment, Socket Wrench (Item 49.1,
2320-366-10-1).
Engine shut down (TM 9-2320-366-20-1).
Batteries disconnected (TM 9-2320-366-20-1).
Materials/Parts
Gasket (2) (Item 29.1, Appendix G)
Parts Kits, Seal Replacement, Mechanical (Item
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
222.1, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Socket Set, Socket Wrench (Item 36, Appendix C)
Pan, Drain (Item 43, Appendix E)
Personnel Required
(2)
a. Removal.
NOTE
Tag connectors and connection points prior
to disconnecting.
(1) Loosen screw (1) on connector L8 (2) and
connector L9 (3).
(2) Disconnect connector L8 (2) from four way relief
valve (4).
(3) Remove gasket (5) from connector L8 (2). Discard
gasket.
(4)
Disconnect connector L9 (3) from four way relief
valve (4).
(5)
Remove gasket (6) from connectors L9 (3). Discard
gasket.
19-119
