TM 9-2320-366-20-5
d. Assembly.
(1) Place tee (1) in vise.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(2) Apply sealing compound to first two to five threads of
adapter (2).
(3) Position adapter (2) in tee (1).
(4) Tighten adapter (2) to 79-87 lb-ft (107-118 Nm).
(5) Apply sealing compound to first two to five threads of
adapter (3).
(6) Position adapter (3) in tee (1).
(7) Tighten adapter (3) to 79-87 lb-ft (107-118 Nm).
(8) Apply sealing compound to first two to five threads of 90-
degree fitting (4).
(9) Position 90-degree fitting (4) in adapter (3).
(10) Tighten 90-degree fitting (4) to 79-87 lb-ft (107-118 Nm).
19-117
