TM 9-2320-366-20-5
19-13. HYDRAULIC OIL FILTER ASSEMBLY SERVICE/REPLACEMENT (CONT)
c. Installation.
NOTE
Apply lubricating oil to preformed packings
during installation.
(1) Install hydraulic oil filter assembly (1) on bracket (2) with
four washers (3) and screws (4).
(2) Tighten four screws (4) to 20-24 ft-lb (27-33 Nm).
(3) Apply antiseizing tape to threads of hydraulic oil
sampling valve (5).
(4) Install hydraulic oil sampling valve (5) in adapter (6).
(5) Install preformed packing (7) on adapter (6).
(6) Install adapter (6) in hydraulic oil filter assembly (1).
(7) Install preformed packing (8) on fitting (9).
(8) Install fitting (9) on hydraulic oil filter assembly (1).
(9) Connect hose (10) to fitting (9).
(10) Connect hose (11) to adapter (6).
d. Follow-On Maintenance.
(1) Fill hydraulic reservoir (Appendix H).
(2) Start engine (TM 9-2320-366-10-1).
(3) Check for oil leaks around hydraulic oil filter.
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
19-68
