TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Cap and Plug Set (Item 14, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Hydraulic Fluid A (Item 25, Appendix D)
Packing, Preformed (2) (Item 186, Appendix G)
Nut, Self-Locking (Item 128, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Pin, Cotter (Item 226, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Personnel Required
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
(2)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Wrench Set, Socket (Item 50, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
NOTE
Left and right suspension cylinders are
removed the same way. Right side shown.
(1) Remove two quick release pins (1) from suspension
cylinder (2).
(2) Remove screw (3) and two lanyards (4) from suspension
cylinder (2).
