TM 9-2320-366-20-5
(61) Remove dipstick (41) from air/hydraulic power unit (34).
(62) Remove preformed packing (42) from dipstick (41).
Discard preformed packing.
(63) Install preformed packing (42) on dipstick (41).
(64) Install dipstick (41) in air/hydraulic power unit (34) and
hand tighten.
(65) Position decontamination unit mounting bracket (21) on
spare tire retainer (24) with two washers (23) and screws
(22).
(66) Position four washers (19), two screws (20), and nuts
(18) in decontamination unit mounting bracket (21).
(67) Tighten two screws (22) and nuts (18) to 18-22 lb-ft (24-
30 Nm).
(68) Remove filler plug (9) from back-up hydraulic pump (4).
(69) Remove preformed packing (43) from filler plug (9).
Discard preformed packing.
(70) Fill back-up hydraulic pump (4) with hydraulic fluid.
(71) Install preformed packing (43) on filler plug (9).
(72) Install filler plug (9) in back-up hydraulic pump (4).
19-43
