TM 9-2320-366-20-5
This task covers:
a.
Air/Hydraulic
Power
Unit
Removal
e.
Air/Hydraulic Power Unit Installation
b.
Air/Hydraulic
Power
Unit
Disassembly
f.
Bracket Removal
c.
Air/Hydraulic
Power
Unit
Cleaning/Inspection
g.
Bracket Installation
d.
Air/Hydraulic
Power
Unit
Assembly
h.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts (Cont)
Engine shut down (TM 9-2320-366-10-1).
Packing, Preformed (Item 207.1, Appendix G)
Spare tire lowered (TM 9-2320-366-10-2).
Packing, Preformed (Item 197.2, Appendix G)
M13 decontamination unit removed, if equipped (TM 3-
Gasket (Item 27.1, Appendix G)
4230-214-12&P).
Washer, Flat (Item 280.1, Appendix G)
Air springs deflated (TM 9-2320-366-10-1).
Lockwasher (3) (Item 105.2, Appendix G)
Packing, Preformed (Item 197.1, Appendix G)
Packing, Preformed (2) (Item 192.2, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Retainer, Packing (2) (Item 241.2, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Retainer, Packing (2) (Item 241.3, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Rags, Wiping (Item 50, Appendix D)
Wrench Set, Socket (Item 51, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
Pan, Drain (Item 24, Appendix C)
(Item 20, Appendix D)
Goggles, Industrial (Item 15, Appendix C)
Cap and Plug Set (Item 14, Appendix D)
Gloves, Rubber (Item 13, Appendix C)
Antiseize Compound (Item 58, Appendix D)
Hydraulic Fluid A (Item 25, Appendix D)
Washer, Spring (4) (Item 291, Appendix G)
Materials/Parts
Packing, Preformed (2) (Item 186, Appendix G)
Nut, Self-Locking (4) (Item 168, Appendix G)
Gasket (Item 31, Appendix G)
Packing, Preformed (2) (Item 189.1, Appendix G)
References
TM 3-4230-214-12 & P
19-5
