TM 9-2320-366-20-5
19-3. AIR/HYDRAULIC POWER UNIT AND BRACKET REPLACEMENT/REPAIR (CONT)
a. Air/Hydraulic Power Unit Removal.
(1) Remove two nuts (1), four washers (2), and two screws
(3) from decontamination unit mounting bracket (4).
(2) Remove two screws (5), washers (6),
and
decontamination unit mounting bracket (4)
from
air/hydraulic unit mounting bracket (7).
(3) Remove four self-locking nuts (8) and screws (9) from
decontamination unit mounting bracket (4). Discard self-
locking nuts.
(4) Disconnect air hose (10) from fitting (11).
(5) Remove fitting (11) from air/hydraulic power unit (12).
19-6
Change 1