TM 9-2320-366-20-5
17-13. M1089 HOOK BLOCK AND CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(5) Pack roller bearing (13) with grease.
(6) Install roller bearing (13) in cable pulley (14).
(7) Install cable pulley (14) and two sleeve bushings
(15) in hook block (8) with shouldered shaft (16),
key washer (17), and nut (18).
(8) Bend up tabs of key washer (17) in slots of nut
(18).
(9) Install lubrication fitting (19) in shouldered shaft
(16).
(10) Apply grease to lubrication fitting (19).
(11) Install eye bolt (20) in shouldered shaft (16).
(12) Install bushing (21), washer (22), lockwasher
(23), and screw (24) in hook block (8).
(13) Install four straight shafts (25) in hook block (8).
(14) Install eight cotter pins (26) in four straight
shafts (25).
Change 2