TM 9-2320-366-20-5
(5) Remove lubrication fitting (10) from shouldered shaft (9).
(6) Bend down tabs of key washer (11).
(7) Remove nut (12), key washer (11) and shouldered shaft
(9) from hook block (3). Discard key washer.
(8) Remove cable pulley (13) and two sleeve spacers (14)
from hook block (3).
(9) Remove roller bearing (15) from cable pulley (13).
(10) Remove cotter pin (16) from slotted nut (17). Discard
cotter pin.
(11) Remove slotted nut (17), washer (18), thrust bearing
(19), and swivel hook (20) from hook block (3).
(12) Remove safety pin (21) from swivel hook (20).
(13) Remove self-locking nut (22), screw (23), and lanyard
(24) from latch (25). Discard self-locking nut.
(14) Remove latch (25) and spring (26) from swivel hook (20).
17-47
