TM 9-2320-366-20-5
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Material/Parts
MHC erected (TM 9-2320-366-10-2).
Solvent, Dry Cleaning (Item 65, Appendix D)
Hoist cable extended until hook block rests on
Grease, Automotive and Artillery (GAA) (Item 22,
ground (TM 9-2320-366-10-2).
Engine shut down (TM 9-2320-366-10-1).
Pin, Cotter (Item 233, Appendix G)
Lockwasher (Item 98, Appendix G)
Washer, Key (Item 282, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Pin, Cotter (8) (Item 229, Appendix G)
Gloves, Welders (Item 14, Appendix C)
Pin, Cotter (Item 235, Appendix G)
Gloves, Rubber (Item 13, Appendix C)
Nut, Self-Locking (Item 174, Appendix G)
Apron, Rubber (Item 3, Appendix C)
Clamp, Wire Rope, Saddled (Item 9.1, Appendix G)
Weight, 200-250 lbs (91-113 kgs)
Personnel Required
(2)
References
FM 5-125
TB 43-0142
a. Removal.
WARNING
Cable can become frayed or contain
broken wires. Wear heavy leather-palmed
gloves when handling cable. Frayed or
broken wires can injure hands. Failure to
comply may result in injury to personnel.
(1) Remove cotter pin (1) from nut (2). Discard cotter
pin.
(2) Remove nut (2), two washers (3), screw (4) and
wedge socket (5) from boom (6).
17-45
