TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10).
Drill Set, Twist (Item 6, Appendix C)
M1084/M1086 hydraulic accumulator removed (para
Tool Kit, Blind Rivet (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Tools and Special Tools
Materials/Parts
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (3) (Item 167, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Rivet, Blind (2) (Item 244, Appendix G)
Drill, Portable, Electric (Item 7, Appendix C)
Lockwasher (2) (Item 94, Appendix G)
a. Removal.
(1) Open door (1) on stowage box (2).
(2) Remove remote control cable (3) from stowage box (2).
(3) Remove two self-locking nuts (4), bolts (5) and washers
(6) from control panel (7). Discard self-locking nuts.
(4) Remove two screws (8), lockwashers (9), washers (10),
and stowage box (2) from control panel (7). Discard
Change 1
