TM 9-2320-366-20-5
(5) Remove self-locking nut (11), two washers (12), bolt
(13), and bracket (14) from stowage box (2). Discard
self-locking nut.
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
(6) Remove two rivets (15) and latch (16) from stowage box
(2).
b. Installation.
(1) Install latch (1) on stowage box (2) with two rivets (3).
(2) Position bracket (4) on stowage box (2) with bolt (5), two
washers (6), and self-locking nut (7).
(3) Position stowage box (2) on control panel (8) with two
washers (9), lockwashers (10) and screws (11).
(4) Position two washers (12) and bolts (13) in control panel
(8) with two self-locking nuts (14).
(5) Tighten self-locking nut (7) to 22-28 lb-ft (29-39 Nm).
(6) Tighten two screws (11) to 8-10 lb-ft (9-11 Nm).
(7) Tighten two self-locking nuts (14) to 22-28 lb-ft (29-39
Nm).
Change 1
17-15
