TM 9-2320-366-20-4
This task covers:
a.
Window and Window Regulator Removal
e.
Door Removal
b.
Window and Window Regulator Installation
f.
Door Installation
c.
Door Latch/Lock Disassembly
g.
Door Adjustment
d.
Door Latch/Lock Assembly
h.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Soap, Laundry (Item 63, Appendix D)
Marker light removed (para 7-38).
Grease, Automotive and Artillery (GAA) (Item
22, Appendix D)
Sealing Compound (Item 60, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Rivet, Compression (10) (Item 259, Appendix
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Seal, Nonmetallic (Item 270, Appendix G)
Screwdriver Attachment, Socket Wrench (Item 64,
Rivet (Item 243.2, Appendix G)
Socket Set, Socket Wrench (Item 36, Appendix C)
Personnel Required
Tool Kit, Blind Rivet (Item 44, Appendix C)
(2)
Drill, Portable, Electric (Item 7, Appendix C)
Drill, Twist (Item 8, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
NOTE
If complete repair of the door is required, it
will be necessary to notify DS maintenance to
replace the door side window at the
completion of Unit level repairs.
a. Window and Window Regulator Removal.
NOTE
Left and right windows and window reg-ulators
are removed the same way. Right side shown.
(1) Remove cover (1) from door handle (2).
(2) Remove screw (3), door handle (2), and washer (4) from
door (5).
(3) Remove four screws (6) and door handle (7) from door
(5).
Change 1
