TM 9-2320-366-20-4
(2) Position window regulator (3) in door (4).
(3) Align holes in window regulator (3) and mounting holes
of door (4).
(4) Position four washers (5) and screws (6) in window
regulator (3).
(5) Tighten four screws (6) to 70-85 lb-in. (8-10 Nm).
(6) Position window crank (7) on window regulator (3).
WARNING
Use care when installing window. Do not
force window or window may shatter.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Steps (7) and (8) require the aid of an
assistant.
(7) Position window (8) in door (4) at a slight angle.
(8) Support window (8) and install two washers (9) and
screws (10) in window regulator (3).
(9) Lower window (8) until completely down.
