TM 9-2320-366-20-4
14-13. GRAVEL DEFLECTOR AND GRAVEL DEFLECTOR EXTENSION REPLACEMENT
(CONT)
(3) Remove four screws (6) from top edge of gravel
deflector (7).
(4) Remove three screws (8), self-locking nuts (9), and
gravel deflector (7) from two brackets (10). Discard self-
locking nuts.
b. Installation
(1) Position gravel deflector (11) on brackets (12) with three
screws (13) and self-locking nuts (14).
(2) Tighten three self-locking nuts (14) to 76-94 lb-ft (103-
127 Nm).
(3) Position four screws (15) in top edge of gravel deflector
(11).
(4) Tighten four screws (15) TO 43-52 lb-ft (58-71 Nm).
(5) Position gravel deflector extension (16) on gravel
deflector (17) with screw (18).
(6) Position two screws (19) in gravel deflector extension
(16) with two self-locking nuts (20).
(7) Tighten screw (18) to 43-52 lb-ft (58-70 Nm).
(8) Tighten two self-locking nuts (20) to 76-94 lb-ft (103-127
Nm).
End of Task.
Change 1
