TM 9-2320-366-20-4
11-3. REAR BRAKE SHOES REPLACEMENT/ADJUSTMENT (CONT)
CAUTION
Wheel drum clearance must be checked along
centerline of brake shoe at scallop. Failure to
comply may result in damage to equipment.
All adjustments on any wheel should be within
six clicks of one another. Record the number of
clicks as adjusting screw is loosened. If not,
repeat procedure or examine for damage.
Failure to comply may result in damage to
equipment.
(17) Back-off adjusting screw (8) to obtain 0.020-0.040 in.
(0.051-0.102 cm) clearance between brake shoe and
wheel drum.
(18) Remove screw (6), lockwasher (7), and brake adjusting
tool support from spider (4).
(19) Install lockwasher (7) and screw (6) in spider (4).
e. Follow-On Maintenance.
(1) Install tire (TM 9-2320-366-10-2).
(2) Start engine (TM 9-2320-366-10-1).
(3) Road test truck and check for proper brake operation.
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
Change 1
