TM 9-2320-366-20-4
d. Installation (S/N 7162 and higher).
NOTE
Step (1) requires the aid of an assistant.
Install plastic cable ties as required.
(1) Route transmission oil cooler hose (1) on vehicle as
noted in removal.
(2) Install preformed packing (2) on 90-degree fitting (3).
(3) Position transmission auxiliary oil cooler hose (1) on 90-
degree fitting (3).
(4) Tighten transmission auxiliary oil cooler hose (1) to 94-
104 lb-ft (127-141 Nm).
(5) Install preformed packing (4) on 90-degree fitting (5).
(6) Position transmission auxiliary oil cooler hose (1) on 90-
degree fitting (5).
(7) Tighten transmission auxiliary oil cooler hose (1) to 94-
104 lb-ft (127-141 Nm).
Change 1
8-149
