TM 9-2320-366-20-4
8-27. M1090/M1094 TRANSMISSION OIL COOLER HOSES INITIAL INSTALLATION
(CONT)
(38) Install gasket (9), flywheel cover (8), and transmission oil
cooler hose bracket (39) on flywheel housing (10) with
four washers (7) and screws (42).
(39) Tighten four self-locking nuts (41) to 96-113 lb-in. (11-13
Nm).
(40) Tighten four screws (42) to 16-25 lb-ft (21-35 Nm).
NOTE
Step (41) requires the aid of an assistant.
(41) Position lower front support crossmember (5) on vehicle
with four bolts (4) and self-locking nuts (3).
(42) Tighten four self-locking nuts (3) to 295-369 lb-ft (400-
500 Nm).
b. Follow-On Maintenance.
(1) Lower cab (TM 9-2320-366-10-1).
(2) Install winch control valve assembly, if equipped (para
17-25).
(3) Connect batteries (para 7-57).
(4) Lower dump body from maintenance legs (TM 9-2320-
366-10-2).
(5) Service transmission (Appendix H).
(6) Operate vehicle and check transmission oil cooler hoses
and fittings for oil leaks (TM 9-2320-366-10-1).
End of Task.
8-144
Change 1
