TM 9-2320-366-20-4
8-15. M1083/M1084/M1085/M1086/M1093 TRANSMISSION AUXILIARY OIL COOLER
HOSE REPLACEMENT (CONT)
c. Removal (S/N 7126 and higher).
CAUTION
Cap or plug hoses and fittings when
disconnecting to prevent contamination of
transmission oil. Failure to comply may
result in damage to equipment.
NOTE
Tag hoses, fittings, and connection points
prior to disconnecting.
Remove plastic cable ties as required.
(1) Position drain pan under transmission auxiliary cooler
(1).
(2) Disconnect transmission auxiliary oil cooler hose (2) from
90-degree fittings (3).
(3) Remove preformed packing (4) from 90-degree fitting (3).
Discard preformed packing.
NOTE
Step (4) requires the aid of an assistant.
(4) Remove self-locking nut (5), bolt (6), and two clamps (7)
from bracket (8). Discard self-locking nut.
NOTE
One clamp will be removed from trans-
mission oil cooler hose that is being
removed.
(5) Remove clamp (7) from transmission auxiliary oil cooler
hoses (2).
Change 1
