TM 9-2320-366-20-4
HOSE REPLACEMENT
This task covers:
a. Removal (S/N 0001-7161)
c. Removal (S/N 7162 and higher)
b. Installation (S/N 0001-7161)
d. Installation (S/N 7162 and higher)
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Ties, Cable, Plastic (Item 69, Appendix D)
Pan, Drain (Item 24, Appendix C)
Nut, Self-Locking (Item 128, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Packing, Preformed (2) (Item 179, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque 0-200 lb-ft (Item 60, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12.1,
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Ensure exhaust system is cool before performing maintenance. Failure to comply may result in
injury to personnel.
NOTE
Vehicle serial numbers 0001 through 7161 may have transmission oil cooler tubes installed. Vehicle
serial numbers 7162 and higher will have transmission oil cooler hoses.
a. Removal (S/N 0001-7161).
CAUTION
Cap or plug hoses and fittings when disconnecting to prevent contamination of transmission oil. Failure
to comply may result in damage to equipment.
NOTE
Tag hoses, fittings, and connection points prior to disconnecting.
Remove plastic cable ties as required.
Change 1
