TM 9-2320-366-20-4
NOTE
Steps (3) through (13) require the aid of an
assistant.
(3) Remove six self-locking nuts (4), 12 washers (5), six
bolts (6), and 18 washers (7) from transmission auxiliary
oil cooler (8). Discard self-locking nuts.
(4) Remove fan shroud (9) and two seals (10) from trans-
mission auxiliary oil cooler (8). Discard seals.
CAUTION
Cap or plug hoses and tubes when
disconnecting to prevent contamination of
transmission oil. Failure to comply may result
in damage to equipment.
NOTE
Tag oil hoses and connection points prior to
disconnecting.
(5) Position transmission auxiliary oil cooler (8) for access to
90-degree fittings (11 and 12).
(6) Position drain pan under transmission auxiliary oil cooler
(8).
(7) Disconnect transmission oil cooler hoses (13 and 14)
from 90-degree fittings (11 and 12).
Change 1
8-75
