TM 9-2320-366-20-4
(17) Position transmission auxiliary oil cooler (29) in left and
right transmission auxiliary oil cooler frames (2 and 6)
with six washers (32), spring washers (33), and self-
locking nuts (34).
(18) Tighten six self-locking nuts (34) to 22-26 lb-ft (29-35
Nm).
(19) Connect connectors P209A and P209B (35 and 36) to
connectors J209A and J209B (37 and 38).
(20) Connect two connector clamps (39) on connectors
J209A and J209B (37 and 38).
(21) Position bracket (40) on left transmission auxiliary oil
cooler frame (2) with screw (41) and self-locking nut
(42).
(22) Position clamp (43) on transmission oil cooler hose (44).
(23) Position clamp (43) on bracket (40) with screw (45) and
self-locking nut (46).
(24) Tighten self-locking nuts (42 and 46) to 84-132 lb-in. (9-
15 Nm).
Change 1
8-71
