TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape (Item
Muffler and heat shield removed (para (5-2).
20, Appendix D)
Kick panel removed (para 16-3).
Ties, Cable, Plastic (Item 69, Appendix D)
Lockwasher (8) (Item 76, Appendix G)
Lockwasher (4) (Item 82, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Lockwasher (4) (Item 96, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Nut, Self-Locking (13) (Item 128, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Washer, Spring (2) (Item 289, Appendix G)
Personnel Required
(2)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
NOTE
Remove plastic cable ties as required.
Tag connectors, terminal lugs, and connection
points prior to disconnecting.
(1) Disconnect connector P74 (1), P76 (2), P77 (3), and P78
(4) from left taillight connectors 22 (5), 24 (6), 23 (7),
and 21 (8).
Change 1
