TM 9-2320-366-20-4
7-139. M1088 INTERMEDIATE INTERVEHICULAR 12
VDC (7
Pin) CABLE
REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Tools and Special Tools
NOTE
Vehicle serial numbers 0001 through 2359
were not originally equipped with gladhand
selector valves. Vehicle serial numbers 2360
and higher are equipped with gladhand
selector valves. M1088 without gladhand
selector valves shown.
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector J52 (1) from connector P52M (2).
(2) Remove two self-locking nuts (3), screws (4), washers
(5), and intermediate intervehicular 12 vdc cable (6) from
mounting bracket (7). Discard self-locking nuts.
Change 1