TM 9-2320-366-20-4
REPLACEMENT
This task covers:
a. Removal (M1083 with winch/M1084/M1085 with
d. Installation (M1083 w/o winch/M1085 w/o
winch/M1086/M1090/M1094)
winch/M1092/M1093 w/o winch/M1096)
b. Installation (M1083 with winch/M1084/M1085 with
e. Removal (M1088 w/o winch)
winch/M1086/M1090/M1094)
f. Installation (M1088 w/o winch)
c. Removal (M1083 w/o winch/M1085 w/o
g. Follow-On Maintenance
winch/M1092/M1093 w/o winch/M1096)
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Dump body raised to maintenance position
Wrench, Torque, 0-200 lb-in. (Item 59,
(M1090/M1094) (TM 9-2320-366-10-1).
Batteries disconnected (para 7-57).
Socket Set, Socket Wrench (Item 34, Appendix
Lower radiator fan shroud removed (c. thru f.) (para 6-4).
Personnel heater removed for access (c. thru f.) para
18-9).
Materials/Parts
Tools and Special Tools
WARNING
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal (M1083 with winch/M1084/M1085
with
winch/M1086/M1090/M1094).
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector clamp (1) from connector P209
(2).
(2) Disconnect connector P209 (2) from connector J209 (3).