TM 9-2320-366-20-4
7-135. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT (CONT)
(2) Remove self-locking nut (3), clamp (4), terminal lug TL83
(5) from screw (6). Discard self-locking nut.
(3) Remove terminal lug TL111 (7) and terminal lug TL320
(8) from screw (6).
(4) DELETED
(5) Remove clamp (4) from winch control valve cable
assembly (9).
NOTE
Other hoses, cable assemblies, and terminal
lugs are removed with clamps and winch control
valve cable assembly.
Steps (6) and (7) require the aid of an assistant.
(6) Remove three self-locking nuts (10), clamps (11), winch
control valve cable assembly (9), and three screws (12)
from right frame rail (13). Discard self-locking nuts.
(7) Remove three clamps (11) from winch control valve
cable assembly (9).
7-666
Change 1