TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Ties, Cable, Plastic (Item 69, Appendix D)
Nut, Self-Locking (3) (Item 128, Appendix G)
Nut, Self-Locking (Item 150, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Personnel Required
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector J215 (1) from connector P215 (2).
Change 1
