TM 9-2320-366-20-4
(6) Position terminal lug TL55 (6) on starter solenoid
terminal (7) with nut (8).
(7) Tighten nut (8) to 30 lb-ft (41 Nm).
(8) Position terminal lug TL26 (9) on starter solenoid
terminal (10) with nut (11).
(9) Tighten nut (11) to 31 lb-in. (4 Nm).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
Keep away from open fire and use in a well-
ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury to
personnel.
(10) Apply adhesive to nuts (8 and 11).
(11) Position terminal lugs TL25 (12) and TL53 (13) on
starting motor terminal (14) with nut (15).
(12) Tighten nut (15) to 33-37 lb-ft (45-50 Nm).
(13) Apply adhesive to terminal lugs TL25 (12) and TL53 (13)
and starting motor terminal (14).
Change 1
