TM 9-2320-366-20-4
7-132. START AND CHARGING CABLE ASSEMBLY REPLACEMENT (CONT)
(16) Install terminal lugs TL33 (23) and TL23 (24) on auxiliary
starter solenoid (20) with two lockwashers (25) and nuts
(26).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(17) Apply adhesive to nuts (22 and 26).
NOTE
Perform steps (18) and (19) on vehicles
equipped with 200 amp alternator.
(18) Install terminal lug TL36 (27) on 200 amp terminal block
terminal (28) with washer (29), lockwasher (30), and nut
(31).
(19) Tighten nut (31) to 16-18 lb-ft (21-25 N m).
7-652
