TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape
PDP cover removed (para 16-2).
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Adhesive (Item 8, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Lockwasher (3) (Item 96, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Lockwasher (2) (Item 93, Appendix G)
Socket Set, Socket Wrench (Item 34, Appendix C)
Adhesive (Item 10.1, Appendix D)
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
a. Removal.
NOTE
Remove plastic cable ties as required.
Tag wires and connection points prior to
disconnecting.
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
Change 1
