TM 9-2320-366-20-4
7-81. FRONT INTERVEHICULAR 12
VDC (7
PIN) CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Tools and Special Tools
WARNING
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector J52 (1) from connector P52F (2).
(2) Remove two self-locking nuts (3), four washers (4), two
screws (5), and front intervehicular 12 vdc cable (6) from
vehicle. Discard self-locking nuts.
b. Installation.
(1) Install front intervehicular 12 vdc cable (6) on vehicle
with two screws (5), four washers (4), and two self-
locking nuts (3).
NOTE
Install plastic cable ties as required.
(2) Connect connector J52 (1) to connector P52F (2).
End of Task.
Change 1