TM 9-2320-272-24-4
5-94. EMERGENCY LAMP WIRING HARNESS REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M934/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Battery ground cables disconnected (para. 3-126).
l
Locknut (Appendix D, Item 294)
Ceiling filter and side panels removed (para. 5-79).
l
NOTE
Tag wires for installation.
Remove twelve screws (16) and clamps (15) from van ceiling (13) and wiring harness (14).
1.
Remove two screws (6) and cover (5) from switch (8).
2.
Remove two screws (7) and switch (8) from switch box (10).
3.
Disconnect two wires (4) and wire (9) from switch (8).
4.
Remove four screws (3) and box (10) from van wall (2).
5.
Remove grommet (1) from switch box (10).
6.
Disconnect emergency lamp wiring harness lead (11) from emergency lamp wiring harness lead (12).
7.
Remove twelve screws (16) and clamps (15) from wiring harness (17) in van ceiling (13).
8.
Remove grommet (18) and wiring harness (17) from van ceiling (13).
9.
5-582
