TM 9-2320-272-24-4
5-94. EMERGENCY LAMP WIRING HARNESS REPLACEMENT (Contd)
Disconnect lead (2) from circuit breaker (1).
10.
Remove two screws (5) and clamps (4) from wiring harness (3) and van body (12).
11.
Remove two screws (11) and clamps (6) from wiring harness (3) and van body (12).
12.
Remove locknut (8), screw (10), clamp (9), and wiring harness (3) from spare tire carrier bracket (7).
13.
Discard locknut (8).
Remove nut (13) and wire (15) from positive battery terminal (14).
14.
b. Installation
Install wire (15) on positive battery terminal (14) with nut (13).
1.
Install wiring harness (3) on spare tire carrier bracket (7) with clamp (9), screw (10), and new
2.
locknut (8).
Install two clamps (6) on wiring harness (3) and van body (12) with two screws (11).
3.
Install two clamps (4) on wiring harness (3) and van body (12) with two screws (5).
4.
Connect lead (2) to circuit breaker (1).
5.
5-584
