TM 9-2320-272-24-4
5-80. CEILING REAR COVER REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INlTlAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M934/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDlTlON
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
SPECIAL ENVIRONMENTAL CONDITIONS
Vehicle must be on a level surface.
PERSONNEL REQUIRED
TWO
Remove eight screws (4), thirteen screws (5), and rear cover (3) from rear head (2) and air
duct (1).
NOTE
Insulate areas of dissimilar metal-to-metal contact with zinc
l
chromate primer.
Apply adhesive to metal surfaces.
l
Insulate entire structure with fibrous glass felt insulation.
l
1.
Install rear cover (3) on rear header (2) with eight screws (4).
2.
Install rear cover (3) on air duct (1) with thirteen screws (5).
5-534