TM 9-2320-272-24-4
5-82. CEILING TRANSITION MAINTENANCE
THIS TASK COVERS:
c. Assembly
a. Removal
d. Installation
b. Disassembly
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M934/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Rivet gun
l Parking brake set (TM 9-2320-272-10).
Van sides fully expanded and secured
l
MATERIALS/PARTS
(TM 9-2320-272-10).
Two seals, 15 in. (Appendix D, Item 617)
Ceiling filler and side panels removed (para. 5-79).
l
Twenty-four rivets (Appendix D, Item 542)
Ceiling air ducts removed (para. 5-81).
l
Two seals, 28 in. (Appendix D, Item 617)
SPECIAL ENVIRONMENTAL CONDITIONS
Adhesive (Appendix C, Item 7)
Vehicle must be on a level surface.
a. Removal
Remove seven screws (4) from support (8).
1.
NOTE
Assistants will help with step 2.
Remove thirty screws (2) and transition (3) from ceiling (1).
2.
Remove seven rivets (6), retainer (7), seal (5), and support (8) from transition (3). Discard rivets (6)
1.
and seal (5).
Remove ten rivets (18), two retainers (9), and seals (10) from transition (3). Discard seals (10) and
2.
rivets (18).
Remove seven rivets (16), retainer (17), and seal (15) from transition (3). Discard seal (15) and
3.
rivets (16).
Remove four screws (11) and filler angle (12) from transition (3).
4.
Remove three screws (13) and filler angle (14) from transition (3).
5.
5-538
