TM 9-2320-272-24-4
THIS TASK COVERS:
b. Installation
a. Removal
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDlTlON
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
l Ladders removed (TM 9-2320-272-10).
Ten locknuts (Appendix D, Item 291)
GENERAL SAFETY INSTRUCTIONS
Twelve locknuts (Appendix D, Item 321)
All personnel must stand clear during lifting
PERSONNEL REQUIRED
operations.
Two
Remove four locknuts (18), screws (13), washers (14), springs (15), and springs (16) from van
1.
body (1) and two frame brackets (8). Discard locknuts (18).
Remove eight locknuts (12) and screws (9) from van body (1) and four frame brackets (8). Discard
2.
locknuts (12).
Attach chain to four lifting brackets (2) and lifting device.
3.
WARNING
All personnel must stand clear during lifting operations. A
snapped cable, or swinging or shifting load, may result in injury to
personnel.
NOTE
Second assistant will help with steps 4 and 5.
Raise van body (1) clear of frame (7), release parking brake, and remove vehicle from under van
4.
body (1).
Lower van body (1) onto jack stands positioned evenly under van body (1).
5.
Remove four blocks (5) from frame brackets (8).
6.
NOTE
Sills and hardware will be in position for removal after van body
has been removed.
Remove ten locknuts (3), bevel washers (4), screws (10, washers (11), and two sills (6) and (17) from
7.
van body (1). Discard locknuts (3).
Remove chain from lifting device and four lifting brackets (2).
8.
5-464
