TM 9-2320-272-24-4
Install two sills (6) and (17) on van body (1) with ten washers (11), screws (10), bevel
1.
washers (4), and new locknuts (3).
Position four blocks (5) on frame brackets (8).
2.
Attach chain to four lifting brackets (2) and lifting device.
3.
WARNING
All personnel must stand clear during lifting operations. A
snapped cable, or swinging or shifting load, may result in injury to
personnel.
NOTE
Second assistant will help with steps 4 and 5.
4.
Raise van body (1) from jack stands, and remove jack stands from under van body (1).
Position vehicle under van body (1) and set parking brake.
5.
6.
Lower van body (1) onto frame (7) and align holes of frame brackets (8) and van body (1).
7.
Install van body (1) on four frame brackets (8) with eight screws (9) and new locknuts (12).
8.
Install van body (1) on two frame brackets (8) with four springs (15), springs (16), washers (14),
screws (13), and new locknuts (18).
Remove chains from lifting device and four lifting brackets (2).
9.
5-466
