TM 9-2320-272-24-4
87.
Carefully align index marks made during disassembly and position two differential gear housings (2)
and (3) on helical ring gear (14) and install with eight screws (15) and slotted nuts (13). Tighten
nuts (13) 130-170 lb-ft (176-231 Nm). Secure with new safety wire (12). Twist ends of safety
wire (12) together until wire is tight. Remove and discard excess safety wire (12).
88.
Place two races (16) over bearings (1) and (4) on differential gear (17) and set assembly in
saddles (18) of differential carrier housing (20). Ensure races (16) seat inside threads of saddles (18).
89.
If races (16) do not fully seat in saddles (18), check that helical ring gear (14) is in mesh with helical
pinion gear (19).
5-459
