TM 9-2320-272-24-4
5-56. LOW CLUTCH REMOVAL AND CLEARANCE
THIS TASK COVERS:
a. Removal
c. Establishing Clearance
b. Cleaning and Inspection
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Rear cover and low planetary carrier removed
Depth micrometer (Appendix E, Item 81)
MATERIALS/PARTS
SPECIAL ENVIRONMENTAL CONDITIONS
Gasket (Appendix D, Item 228)
Work area clean and free from blowing dirt and
dust.
a.
Removal
Remove low planetary ring gear (1), snapring (3), and low gear ring hub (2) from adapter
1.
housing (6).
NOTE
Mark position of clutch plates in adapter housing for installation.
Remove eight clutch plates (4) and seven clutch discs (5) from adapter housing (6).
2.
b. Cleaning and Inspection
For general cleaning instructions, refer to para. 2-14.
1.
For general inspection instructions, refer to para. 2-15.
2.
Inspect clutch discs (5) for burned surfaces. If burned, discard clutch discs (5).
3.
Inspect clutch plates (4) for burned surfaces. If burned, discard clutch plates (4).
4.
5-374
